Fluopyram 20% + Pyraclostrobin 20% SC Fungicide

Item	Details
Active Ingredients	Fluopyram + Pyraclostrobin
Content	20% + 20%
Formulation	SC, Suspension Concentrate
Product Type	Combination Fungicide
FRAC Groups	Group 7 + Group 11
Fungicide Classes	SDHI + QoI / Strobilurin
Mode of Action Context	Succinate dehydrogenase inhibition + QoI respiration inhibition
Main Positioning	Broad-spectrum foliar fungal disease management
Crop Direction	Vegetables, fruit crops, grapes, strawberries, field crops, ornamentals, and approved crop programs
Disease Direction	Powdery mildew, Botrytis, leaf spots, rusts, Alternaria-related diseases, blights, and listed fungal diseases where approved
Supply Support	SunAgro branded product supply, packaging communication, documents, and batch quality control

What Is Fluopyram + Pyraclostrobin SC?

Fluopyram 20% + Pyraclostrobin 20% SC is a two-way fungicide formulation for registered crop disease management programs.

The product combines an SDHI fungicide and a QoI fungicide in one SC formulation. Fluopyram supports disease control through succinate dehydrogenase inhibition in fungal respiration. Pyraclostrobin supports disease control through QoI respiration inhibition at a different mitochondrial target site.

This gives the product a clear FRAC 7 + FRAC 11 profile. For local distributors and registration partners, this positioning is important because it separates the product from single-active fungicides and makes the formulation easier to place in planned foliar disease programs.

The product should not be written as a Fluopyram single product or a Pyraclostrobin single product. Its commercial value comes from the combined SDHI + QoI fungicide profile.

Why Combine Fluopyram and Pyraclostrobin?

Fluopyram and Pyraclostrobin are combined to provide two different fungicide classes in one product.

Fluopyram is an SDHI fungicide. It is commonly positioned for foliar disease programs where diseases such as powdery mildew, Botrytis, leaf spots, and other listed fungal diseases are important.

Pyraclostrobin is a QoI / strobilurin fungicide. It is widely used in preventive foliar disease management and broad-spectrum fungal disease programs where local registration allows use.

Together, this combination supports a wider disease management profile than a single-mode fungicide. It can fit fruit, vegetable, field crop, ornamental, and protected crop programs where local labels support use.

This combination can also support resistance management planning. However, it should not be promoted as resistance-proof. Both FRAC Group 7 and FRAC Group 11 require responsible rotation, label-based application limits, and integrated disease management.

Mode of Action: FRAC 7 + FRAC 11

This formulation combines two fungicide groups in one SC product.

Active Ingredient	FRAC Group	Fungicide Class	Mode of Action Context
Fluopyram	Group 7	SDHI / Pyridinyl-ethyl-benzamide	Inhibits succinate dehydrogenase in fungal respiration
Pyraclostrobin	Group 11	QoI / Strobilurin	Inhibits fungal respiration at mitochondrial complex III Qo site

The FRAC 7 + FRAC 11 profile gives this formulation a dual-respiration-inhibition fungicide positioning.

For procurement and registration communication, this information is valuable. It helps local partners explain the product clearly, build fungicide rotation plans, and avoid presenting the product as a simple broad-spectrum cure.

Main Use Direction: Broad-Spectrum Foliar Disease Management

The main product direction is foliar fungal disease management.

In approved crop programs, Fluopyram + Pyraclostrobin SC can be positioned for preventive protection, early disease management, and broad-spectrum foliar disease control. It is especially useful for markets where growers need one combination product covering several important disease directions.

Use Direction	Product Positioning
Preventive disease management	Helps protect crops before or at early disease development
Early disease management	Supports early-stage fungal disease control where approved
Foliar disease control	Suitable for listed leaf diseases in registered crops
Fruit and vegetable disease programs	Supports quality-sensitive disease management
Powdery mildew and leaf spot programs	Important directions where locally registered
Resistance management	Combines FRAC 7 and FRAC 11 for planned fungicide programs

This product should not be promoted as a solution for bacterial diseases, viral diseases, or all fungal problems. Final crop and disease claims must follow local registration and approved labels.

Suitable Crop Directions

This formulation can serve several crop channels, but final crop scope depends on local registration.

Vegetables

For vegetable crop programs, Fluopyram + Pyraclostrobin SC can be positioned for foliar fungal disease management where approved.

Tomato, pepper, cucurbits, leafy vegetables, and other vegetable crops may require protection against powdery mildew, leaf spots, blights, Alternaria-related diseases, and other listed fungal diseases. In these markets, an SDHI + QoI formulation can support disease programs that need preventive and early-stage control positioning.

Fruit Crops

For fruit crops, fungal disease control is closely connected with fruit appearance, harvest quality, residue compliance, and market value.

Fluopyram + Pyraclostrobin SC may be positioned for grapes, strawberries, berries, pome fruits, stone fruits, and other fruit crops where local registration supports use. Product communication should remain careful because PHI, MRL, export destination, and residue limits can vary by country.

Field Crops

For field crops, this formulation may be positioned for approved foliar disease programs where SDHI and QoI activity are useful.

Soybean, cereals, oilseed crops, and other field crops may face rusts, leaf spots, blights, and other fungal disease risks. Final crop and disease claims must follow local label approval.

Ornamentals and Protected Crops

For ornamental, nursery, and protected crop markets, Fluopyram + Pyraclostrobin SC may be positioned for disease programs where local registration allows use.

Powdery mildew, Botrytis, leaf spot diseases, and other greenhouse or nursery fungal disease directions can be relevant, but crop safety and label compliance must be checked carefully.

Target Disease Directions

Fluopyram + Pyraclostrobin SC should be written by disease direction, not as a product that controls every fungus.

Disease Direction	Product Positioning
Powdery mildew	Important direction for SDHI/QoI foliar programs where approved
Botrytis / gray mold	Relevant direction for Fluopyram-containing programs where registered
Leaf spot diseases	Suitable for listed foliar disease programs
Rust diseases	Registration-dependent direction in field crops
Alternaria-related diseases	Relevant to vegetable and fruit crop programs where approved
Blight diseases	Use only where local disease claims support this direction
Fruit and leaf fungal diseases	Depends on crop label and local registration

The strongest product message is not “controls all diseases.” The stronger message is SDHI + QoI foliar fungicide for registered fungal disease programs.

SC Formulation Features

SC means suspension concentrate.

For buyers, the value of an SC formulation is practical liquid handling, market-friendly packaging, and strong formulation positioning for distributor-ready fungicide products. Compared with dry powder formulations, SC products are often preferred in markets that need liquid packs and easier measuring during field preparation.

This formulation direction is suitable for bottles, drums, cartons, export cartons, and local crop protection channels that prefer liquid fungicide products.

For quality control, SC formulation performance should focus on active ingredient content, liquid appearance, suspension stability, sediment control, particle size where applicable, pH where applicable, sealing quality, leakage control, and storage stability.

SC formulations should not be described as never settling or never requiring shaking. Final handling instructions should always follow the approved local label.

Application Guidance

Use Fluopyram + Pyraclostrobin SC only where locally approved.

This product should be used only on registered crops and listed diseases. It is generally positioned for preventive application or early disease development where local label directions support use.

Under high disease pressure, this product should not be relied on as the only disease management tool. Disease management should also include crop monitoring, correct timing, suitable spray coverage, proper rotation, and integrated field management.

No specific dose, dilution rate, spray interval, application frequency, crop stage, tank-mix instruction, PHI, or harvest timing should be used without an approved local label.

Resistance Management

Resistance management is a core part of this product page.

Fluopyram belongs to FRAC Group 7. Pyraclostrobin belongs to FRAC Group 11. Combining two modes of action can support resistance management planning, but it does not remove resistance risk.

SDHI fungicides and QoI fungicides both require responsible rotation. This product should therefore be used within a planned fungicide program, not as a repeated stand-alone solution.

Recommended positioning for local partners:

Use according to local label restrictions.
Rotate with fungicides from different FRAC groups.
Avoid repeated continuous use of the same mode of action.
Follow local FRAC and resistance management guidance.
Integrate fungicide use with crop hygiene, disease monitoring, resistant varieties where available, and proper field management.

The product should not be described as resistance-proof or safe for unlimited seasonal applications.

Crop Safety and Use Boundary

Crop safety and disease control performance depend on crop type, variety, growth stage, disease pressure, application timing, spray coverage, weather, tank-mix partner, and approved local label use.

This product should not be used on crops or diseases not covered by local registration. It should not be promoted for bacterial disease control, viral disease control, or non-fungal crop problems.

For sensitive crops, ornamentals, protected crops, or high-value fruit and vegetable programs, local partners should pay attention to label restrictions, compatibility, residue requirements, crop stage, and local field experience.

Responsible product communication should avoid absolute claims such as no phytotoxicity, complete disease control, all-weather performance, no resistance risk, or guaranteed yield improvement.

Registration and Residue Compliance

Fluopyram and Pyraclostrobin may be used on food crops and high-value crops, so registration and residue compliance must be handled carefully.

Before market promotion or field use, local partners should check local registration status, approved crop scope, target disease claims, application method, pre-harvest interval, MRL requirements, export crop destination, residue testing expectations, packaging label language, and import requirements.

For fruit, vegetable, grain, oilseed, and protected crop markets, PHI and MRL compliance are especially important. Export-oriented crop programs should confirm destination-market residue standards before use.

SunAgro supports qualified market partners with product documents and supply communication for local registration and distribution cooperation. Final registration, label approval, crop claims, disease claims, and field use directions must follow local regulations.

Storage and Transport

Store Fluopyram + Pyraclostrobin SC in sealed original packaging under suitable storage conditions.

The product should be kept in a cool, dry, and ventilated place. Avoid direct sunlight, high temperature, freezing, package damage, leakage, and long-term exposure to unsuitable storage conditions.

For SC formulations, storage attention should focus on liquid appearance, suspension stability, sediment control, active ingredient content, bottle or drum sealing, leakage control, carton protection, and SDS compliance.

Before use, handling instructions such as shaking or mixing should follow the approved local label.

Packaging Support

SunAgro supports packaging communication for Fluopyram 20% + Pyraclostrobin 20% SC according to market needs and order requirements.

Available packaging directions may include bottles, drums, cartons, export cartons, batch coding, carton marks, and multi-language label communication.

Packaging can be adjusted according to product specification, registration direction, destination market, crop channel, distribution plan, and shipment requirement.

The product is suitable for local partners who need a finished SC fungicide formulation with clear active ingredient content, dual-mode positioning, and practical liquid packaging options.

Document Support

SunAgro can support procurement, import communication, registration preparation, and shipment coordination with relevant product documents.

Document support may include COA, SDS/MSDS, TDS, product specification, packing information, label reference, batch information, shipment documents, and registration support documents where applicable.

For this combination fungicide, dual active ingredient specification, SC formulation specification, Fluopyram content report, Pyraclostrobin content report, and physical-chemical reference information where available can support registration and procurement review.

Quality Control

Quality control for Fluopyram + Pyraclostrobin SC focuses on both active ingredients and formulation performance.

Batch review should include Fluopyram content, Pyraclostrobin content, liquid appearance, suspension stability, sedimentation attention, pH attention where applicable, particle size attention where applicable, bottle or drum sealing, leakage control, carton inspection, batch record management, and shipment document review.

Each batch should be checked according to product specification, packaging requirements, and export requirements before shipment.

For importers and distributors, stable formulation quality is important because SC products must maintain acceptable appearance, suspension behavior, packaging integrity, and field preparation performance during storage and distribution.

FAQ

Why Choose SunAgro

SunAgro supplies SunAgro branded crop protection products for qualified importers, distributors, registration companies, agricultural retailers, crop protection channels, and local market partners.

For Fluopyram 20% + Pyraclostrobin 20% SC, SunAgro supports product specification communication, packaging planning, document preparation, batch quality control, and export coordination.

This supply model is suitable for partners who need clear specifications, stable formulation quality, practical liquid packaging options, and document support for local registration and distribution cooperation.

Partner with SunAgro for Fluopyram + Pyraclostrobin SC Supply

If you are sourcing Fluopyram 20% + Pyraclostrobin 20% SC, SunAgro can support your project with product specification, packaging communication, document preparation, quality control, and export coordination.

Please share your destination country, target crop market, disease direction, registration plan, packaging request, and expected order volume. Our team will provide a suitable supply proposal based on your procurement needs.